<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; = charset=iso-8859-1"> <META content="MSHTML 5.00.2314.1000" name=GENERATOR></HEAD> <BODY> <DIV>A note of Caution: Those bolts are different lengths and if not put in correct location, the action is rendered "shiftless" (bolts come up through = keybed and actually can lift action into the air).  A dealer near here has = delivery guys that have never gotten it right.  %~)  So check the shift = after you tighten them.  The dealer should have a ton of them since they = used to be delivered with the tools.  </DIV> <DIV> Lance Lafargue, RPT Mandeville, LA New Orleans = Chapter, PTG lancelafargue@bellsouth.net </DIV> <BLOCKQUOTE> <DIV align=left class=OutlookMessageHeader dir=ltr>-----Original Message----- From: = owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Wimblees@AOL.COM Sent: Saturday, February 24, 2001 5:53 PM To: pianotech@ptg.org Subject: Re: Samick leg bolts </DIV>In a message dated 2/23/01 10:40:30 PM Central Standard Time, = jonpage@mediaone.net writes: <BLOCKQUOTE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px" TYPE="CITE">I went to move a Samick the other day and the leg bolts = were hex cap head. Fortunately the movers who set it up put them on = finger tight so getting them off was no problem. To secure the = legs, I snugged them up with a pair of pliers since I didn't have a = hex key that large. Does anyone know the size of the hex key so I = can have one on hand in the event of another Samick encounter?</BLOCKQUOTE> Stop by any Samick, Wurlitzer or = Hyundai dealer, and ask for one. Each piano comes with one in the moving = crate. Willem </BLOCKQUOTE></BODY></HTML>