<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2919.6307" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2> Terry </FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Is the primer you use before spraying =
the laquer an
enamel or just something compatible with laquer? Is your final result =
prone to
chipping?, or does it stay a bit on the softer side and set up harder =
over
time. (which I like) Just curious as I am experimenting with some =
different
techniques including sandblasting to remove rust and animal urine then =
building
back up with automotive productsof various kinds.Yes it's a pain but =
I've had
some preexsistent stains return to discolor spots in my final topcoats =
over
time.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2> Dale Erwin</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2> </FONT></DIV>
<DIV style="FONT: 10pt arial">----- Original Message -----
<DIV style="BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A
href="mailto:mfarrel2@tampabay.rr.com"
title=mfarrel2@tampabay.rr.com>Farrell</A> </DIV>
<DIV><B>To:</B> <A href="mailto:pianotech@ptg.org"
title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
<DIV><B>Sent:</B> Sunday, July 01, 2001 6:19 AM</DIV>
<DIV><B>Subject:</B> Re: Plate Finish, was Varsol</DIV></DIV>
<DIV><BR></DIV>
<DIV>"Using shellac for the first coat should prevent the fish =
eye."</DIV>
<DIV> </DIV>
<DIV>I don't use shellac, but I hear/read so much about it, I have no =
doubt it
is an excellent way to go. What I do use for my plates though, is grey =
(any
color is fine I'm sure) metal primer that I buy at the auto-parts =
store. I
just use it to hit areas that I have sanded through to the bare metal. =
Sand
lightly after dry. Then I finish with spray can gold laquer. I like to =
just keep
it simple. As long as I am using the spray can laquer for the finish, I =
find it
very easy to use the spray can primer. I have had excellent =
results.</DIV>
<DIV> </DIV>
<DIV>Terry Farrell <SPAN =
id=__#Ath#SignaturePos__></SPAN> </DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A href="mailto:baldyam@sk.sympatico.ca" =
title=baldyam@sk.sympatico.ca>jolly
roger</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
href="mailto:pianotech@ptg.org"
title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, July 01, 2001 =
1:48 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> RE:S&S plate touch =
up &
Varsol</DIV>
<DIV><BR></DIV>
<BLOCKQUOTE type="cite" cite></BLOCKQUOTE><BR>Hi
=
Diane,<BR> &nb=
sp;
Varsol must be a Canadian type thing, for some thing you guy's call =
some thing
else. Two great Nations separated by a common language. (
Churchill I think.)<BR><BR>
<BLOCKQUOTE type="cite" cite>None of the paint stores I went to know =
what
Varsol is......<BR><BR>I bought a good quality gold enamel and one =
of those
fill-it-yourself spray bottles. It looks much better <I>except =
for the
fish-eyes</I></BLOCKQUOTE><BR>Using shellac for the first coat =
should
prevent the fish eye. The oxidization is probably attacking the =
finish
from below. Just a calculated guess. Some of the more expert =
finishers
could probably give advice in this area.<BR>I have done one plate in =
this
manner. The grey market Yamaha just 2yrs ago. The finish seems =
to be
holding up OK. But more time will tell. Weather it will =
eventually eat
it's way through again, I do not know. But I do know shellac can =
be a
very effective sealer. Leave for several days to harden, before =
applying
the finsh coat.<BR>Hope this may help.<BR>Regards Roger<BR><BR><BR>
<BLOCKQUOTE type="cite" cite>Diane Hofstetter
</BLOCKQUOTE><BR></BLOCKQUOTE></BODY></HTML>