<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=text/html;charset=iso-8859-1 = http-equiv=Content-Type> <META content='"MSHTML 4.71.1712.3"' name=GENERATOR> </HEAD> <BODY bgColor=#b8b8b8> <DIV> </DIV> <DIV><FONT color=#000000 face=Arial size=2>'t = MUZIEKINSTRUMENTENATELIER<BR>PETER KESTENS<BR>BELGIUM<BR><A href="mailto:KESTENS.P@DEBCOM.BE">KESTENS.P@DEBCOM.BE</A></FONT></DIV> <DIV><FONT color=#000000 face=Arial size=2></FONT> </DIV> <DIV><FONT color=#000000 face=Arial size=2> <DIV><FONT color=#000000 face=Arial size=2>Collegues,</FONT></DIV> <DIV><FONT color=#000000 face=Arial size=2></FONT> </DIV> <DIV><FONT color=#000000 face=Arial size=2>Can anybody of = you  help me with the hammerblow of an Erard grand; I don't know the exact blow distance, = so I can't do a good regulationjob. For the moment I've used 46 mm but I've = the feeling I have to much aftertouch.  I suppose I'll go to about 48 mm.</FONT></DIV> <DIV><FONT color=#000000 face=Arial size=2></FONT> </DIV> <DIV><FONT color=#000000 face=Arial size=2>Where one exspect the = dipscrew, there is a screw, but as far as I can see it has nothing to do with a real dipscrew.  Can somebody tell me what's the use of this screw?  = When you tight it, you see the hammer doesn't fall down anymore, when you = unscrew it, the hammer falls down again.  This little screw makes part of the = unit that fixes the hammer to the hammer rail.</FONT></DIV> <DIV><FONT color=#000000 face=Arial size=2>There is also something = like an upside down T that has the function of the dipscrew; does anybody knows = a good trick to regulate this T?</FONT></DIV> <DIV><FONT color=#000000 face=Arial size=2>Thanks a lot for your input.</FONT></DIV> <DIV><FONT color=#000000 face=Arial size=2></FONT> </DIV> <DIV><FONT color=#000000 face=Arial size=2>Peter</FONT></DIV></FONT></DIV></BODY></HTML>