<HTML><HTML> In a message dated 2/15/04 10:19:59 AM, imatunr@srvinet.com writes: <BLOCKQUOTE CITE STYLE="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px" TYPE="CITE"> raise 1 or 88 and look for a screw going diagonallyinto the cheek block.</= FONT> The surface will be painted black so they are hard to see in a dimmly lit= room. Joe Goss </BLOCKQUOTE> I did look.  It was rather dimly lit...  But I did look and didn= 't see anything. In a message dated 2/15/04 10:32:50 AM, anrebe@zianet.com writes: <BLOCKQUOTE CITE STYLE="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px" TYPE="CITE">the cheek-blocks slid= on and off of the bars securing the action. </BLOCKQUOTE> <BLOCKQUOTE CITE STYLE="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px" TYPE="CITE">I didn't try sliding = them.  Sliding forward?  They seemed to be fastened at the bac= k end, behind the fallboard, which I couldn't see how to remove.  But = if the whole thing slid forward, fallboard, cheekblocks and all...I didn't t= ry that.  (But I'll try it next time!) </BLOCKQUOTE> Thanks, Tom Sivak </HTML>