<html>
Howdy mate,<br>
I've used it on top of previously applied pin block dope on the odd PSO,
and it seemed to work well enough for the tuning, but I must confess I've
never been back to check.<br>
The beauty of the thin CA, is that it seems to stick to any thing,
including glass. It's wicking capability is what makes it so
versitile.<br>
At the University I have marked a few border line pins that I treated 3
years ago, instead of installing spot over size pins, unless I knew where
the pins were, it would be difficult to tell.<br>
I now have no qualms about using this treatment. I've never been an
advocate of pin block dope.<br>
I've also repinned a complete piano that had a couple of pins treated and
noticed no adverse results.<br>
Like all good things, use your head.<br>
Roger <br>
<br>
<br>
At 03:50 PM 21/11/99 +1100, you wrote: <br>
<br>
<tt><blockquote type=cite cite>G'day Susan, Roger et al,<br>
<br>
I've used CA once or twice quite successfully...but what are your
thoughts<br>
if the pinblock has already been treated with "the glycerin
stuff"?<br>
<br>
Will it hold? Or is the contamination not good for the bond?<br>
<br>
Appreciate anyone's thoughts...<br>
<br>
Cheers<br>
Mark Bolsius<br>
Bolsius Piano Services<br>
Canberra Australia<br>
</tt><br>
</tt></tt></blockquote><br>
<br>
<div>Roger Jolly</div>
<div>Saskatoon, Canada.</div>
<div>306-665-0213</div>
Fax 652-0505
</html>