<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1141" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Well, I suppose most people use Flitz =
on a cloth,
wrapped around the pin and pulled back and forth vigorously. =
</FONT></DIV>
<DIV><FONT face=Arial size=2>&nbsp;&nbsp;&nbsp;</FONT></DIV>
<DIV><FONT face=Arial size=2>&nbsp;&nbsp;&nbsp; What I've been doing =
for the
past few years is a little different. I have a little tool that Jim =
Coleman, JR
makes that's a pin polisher. It's an aluminum sleeve on a spindle in =
which you
pack a whole bunch of balance rail cloth punchings. I use it primarily =
on the
balance rail pins.&nbsp; The first time I used it, I put some flitz down =
in it,
and the result was some pretty brass balance rail pins, since then I =
only use
some CLP soaked into the punchings. The crud on the pins will supply any =

abrasive I need. You can do the entire set after removing the keys in =
less than
five minutes.</FONT></DIV>
<DIV><FONT face=Arial size=2>&nbsp;&nbsp;&nbsp; On the front rail, I =
use a
dremel tool with the little felt polishing wheels. I just put some CLP =
on the
wheel, and buff both sides. It helps to do the sharps from the back side =
of the
frame. Doing it this way seems to burnish the polymer into the metal of =
the pins
while it does the polishing. </FONT></DIV>
<DIV><FONT face=Arial size=2>&nbsp;&nbsp;&nbsp; We had one set of =
Steinway keys
that were re-bushed and were too tight; no side play. Before I eased the =
keys, I
did this, and when I was done, I found that easing the keys wasn't =
necessary,
there was really no excess friction. I figured that, with wear, there =
would be
side play soon enough.&nbsp; The piano never developed any problem, =
either,
which seems to suggest that the treatment was fairly permanent. =
</FONT></DIV>
<DIV><FONT face=Arial size=2>Kevin E. Ramsey</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
  <A title=ppppianotuning@yahoo.com =
href="mailto:ppppianotuning@yahoo.com">Perry
  Williams</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
  href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, March 02, 2003 =
6:07
PM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> cleaning =
center&amp;front rail
  pins</DIV>
  <DIV><BR></DIV>Hi I was wondering what you think is the =
best<BR>cleaning
  solution for center and front rail pins?<BR>Thank you in =
advance.&nbsp;&nbsp;
  &lt;ppp&gt;<BR></BLOCKQUOTE></BODY></HTML>