<HTML><BODY BGCOLOR="#ffffff">In a message dated 12/19/04 7:06:01 A= M Pacific Standard Time, Sspeev@aol.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-= LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"> So I recently removed the action of a Weber console, to do some regulati= ng, but after returning it I noticed that several of the jacks are making a = fairly loud clicking noise, and some of the notes are buzzing (damper relate= d?).  When the action was out, i didn't really touch the jacks all that= much; the only thing i can think of is that i had driven the action around,= to and my from my apartment, and twice while on the backseat it rolled onto= one side and then back onto the other, so maybe that affected something. &n= bsp;Anyhow, as may be apparent, i'm very new to piano technology, so go easy= on me.  Thanks. </BLOCKQUOTE> Scott, I once did some regulation on a Hamilton upright that has hard, syntheti= c butt covering material--aka Corfam.  I adjusted the letoff pretty clo= se to the string, but then all these clicks started happening.  The aft= ertouch I'd removed by regulating the letoff that caused the jacks to not mo= ve far enough away from the butts, so that upon release, they slapped back o= n the Corfam.  Ugly sound, and it took me awhile to figure it out. &nbs= p;I don't know if that's your problem, but it's worth a looksee. Dave Stahl</HTML>