<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Hey Joe !, and anyone else interested. Here's a shot of that square I'm rebuilding. You can see at some point in the past somebody replaced about 80 percent of the tuning pins with bigger modern pins, and left the rest. Nice stuff :)... but the reason I am sending this is to show the string scaling marks  I mentioned the other day. You can see they start at the highest note (farthest left) at 2. and end up at 5/0 before going over to wound strings (where the two open pin holes are on the right side of the picture). Soundboard came out today. Havent decided whether to make a new one or simply re-rib the existing on, but I am leaning towards a new one. Cheers RicB     <img SRC="cid:part1.3FC5068B.5AEAB84@grieg.uib.no" height=480 width=640> -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway <A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A> <A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A> <A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>  </html>