<html> <font size=3>At 12:38 PM 12/17/2000 +0100, you wrote:<br> <blockquote type=cite cite>Hi Jon... The back support is one of the main reasons I have been looking for an alternative. I generally solve that problem by useing a post just under the front of the hammer jig. A bit clumsy but it works. I might try your suggestion of replacing the back support. You ever used the Renner then ? <br> </font></blockquote><br> No, Wally's jig suits the bill once the back support was replaced.<br> <br> Jon Page<br> <br> <br> <blockquote type=cite cite><font size=3>Jon Page wrote: <br> <blockquote type=cite cite>I've been using Wally's hammer boring jig for a long time and see no reason <br> to get a different one.  The back support which came with it was not as sturdy <br> as I would like and i changed it to a piece of 3/4' plywood. I  have a jpg if you <br> want to view it.   Wally's jig is 1/3 the price, $99.00, last I knew. <br> <br> Worth every penny, <br>  </blockquote>-- <br> Richard Brekne <br> RPT, N.P.T.F. <br> Bergen, Norway <br> <a href="mailto:Richard.Brekne@grieg.uib.no">mailto:Richard.Brekne@grieg.uib.no</a> <br>   </font></blockquote><br> <div>Jon Page,   piano technician</div> <div>Harwich Port, Cape Cod, Mass.</div> <div><a href="mailto:jonpage@mediaone.net" EUDORA=AUTOURL>mailto:jonpage@mediaone.net</a></div> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </html>