<HTML>Hi List Believe it or not after 15 years in the business, for the first time, I have broken two action holding screws.  They are the cheap kind put in the Wurlizer Spinets about the size of a #8 wood screw but about 5 inches long.  I have heard other people talk about breaking them but forgot the details. They are broken off about an 1/8th an inch below the plate.  I think they are too small and weak to be removed with a traditional E-Z- Out so; 1.  What is the best way to get them out and 2.  Where can I get a replacement screws that ware harder and so less likely to break? Thanks again for the help. Dick Day Marshall MI</HTML>