<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1458" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Arial"
bottomMargin=7 bgColor=#ffffff leftMargin=7 topMargin=7 =
rightMargin=7>
<DIV> </DIV>
<DIV>There are several pinblock drilling jigs out there. Here is a =
picture
of my drill modified for better reach. Long drills are available =
from
machine shop suppliers. It's just a cheap drill from Harbor =
Freight.
I get full stroke with about one third turn of the handle. </DIV>
<DIV> </DIV>
<DIV>Next post shows the set up.</DIV>
<DIV> </DIV>
<DIV>Carl Meyer Ptg assoc<BR>Santa Clara, Ca.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=rsnelson0984@mchsi.com =
href="mailto:rsnelson0984@mchsi.com">Richard
Oliver Snelson</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, November 15, 2004 =
10:59
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Pinblock drill =
picture.
</DIV>
<DIV><BR></DIV>
<DIV><FONT face="Times New Roman" size=3>Yes it is Dale. I'll set =
it up latter
this week and get pictures. I use an old grand keybed across the top =
of the
piano for the drill to set on. I have the plate out on this piano so =
can't
show bit extension, but you will get the idea. I use the longer bits =
that
Pianoteck has for sale and reach is not a problem. The drill and motor =
are
free (you can adjust) to pivot around a center post. The base can be =
adjusted
for a lot more angle (tilt) than one would want. More later. =
Rich</FONT></DIV>
<DIV>Richard Oliver Snelson<BR></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=Erwinspiano@aol.com
href="mailto:Erwinspiano@aol.com">Erwinspiano@aol.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, November 15, =
2004 8:47
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Pinblock drill =
picture.
</DIV>
<DIV><BR></DIV><FONT id=role_document face=Arial color=#000000 =
size=2>
<DIV>
<DIV><FONT size=3> Hi Richard</FONT></DIV>
<DIV><FONT size=3> Is this a drill the block in the piano =
set up? If
so pleas show this if possible<BR> Dale
E.</FONT></DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px =
solid"><FONT
style="BACKGROUND-COLOR: transparent" face=Arial =
color=#000000 size=2>I'll
take a couple more with a different camera and send them directly =
to
<BR>you. Jeannie wants them for the journal also. The mount is a =
little
more <BR>complex than the picture show as the drill post has been =
inverted
and sits <BR>on a piviot post attached to the base. I want to also =
tell
the source of the <BR>drill chuck extension which comes from =
Garrett Wade.
Rich<BR><BR>Richard Oliver Snelson</FONT></BLOCKQUOTE></DIV>
<DIV></DIV>
<DIV> </DIV></BLOCKQUOTE></BLOCKQUOTE></FONT></BODY></HTML>