<html> At 11:41 AM 4/19/2005 -0500, you wrote: <blockquote type=cite class=cite cite>Hi Conrad, There are 2 pins on each side of the base, and 2 pins on each side of the rack, all sets of pins are 3 inches apart. Here are a couple of small photos that show what the hinges have to fit to. All the best, Doug Conrad Hoffsommer wrote: <blockquote type=cite class=cite cite>At 10:52 4/19/2005, you wrote: <blockquote type=cite class=cite cite>Hi Guy, Thanks for the reference, but, that's not it. The hinges were more like a scissors with pivot points perpendicular to the surface of the brass flange. I'll try to create a file that shows roughly what I think it was. Regards, Doug</blockquote></blockquote></blockquote> Oh yeah! Oh..... well. Hmmm... dunno, Doug. I've got a couple of those in service, and one is due in a couple of weeks. 'S ina church, perhaps I can drop in mañana and take a closer, memory-jogging look. Till then, sorry for the bum steer, Guy <blockquote type=cite class=cite cite><blockquote type=cite= class=cite cite>Was that the type which has pins at the bottom of the rack which run in a groove and there is an arm which attaches about midpoint up the side? Conrad Hoffsommer - Keyboard Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 1-(563)-387-1204 // Fax 1-(563)-387-1076 - Right now, I'm hoping to live until my age matches my golf score, - Until then, I'll have to be content to have my IQ match my handicap. _______________________________________________ pianotech list info: <a href="https://www.moypiano.com/resources/#archives"= eudora="autourl">https://www.moypiano.com/resources/#archives</a> </blockquote> _______________________________________________ pianotech list info: <a href="https://www.moypiano.com/resources/#archives" eudora="autourl"= >https://www.moypiano.com/resources/#archives</a></blockquote></html>