<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=text/html;charset=iso-8859-1 = http-equiv=Content-Type> <META content='"MSHTML 4.72.3110.7"' name=GENERATOR> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT color=#000000 size=2>To the list</FONT></DIV> <DIV><FONT color=#000000 size=2>I am just working on a grand ( = Bösendorfer ) and on it I applied new hammers ( original ) , new center pins, and = others items as knuckles, etc, etc,</FONT></DIV> <DIV><FONT color=#000000 size=2>All the material applied is original = and all the work was made with care and the final product was very, very good except = the touch weight.</FONT></DIV> <DIV><FONT color=#000000 size=2>I did all that I learned and read = but wasn't possible to obtain 52 g on the 1st section, 50 g on the 2nd section and = 48 g on the 3rd and 4th section and this is the problem that I want to know. ( = these are manufacturer measurements)</FONT></DIV> <DIV><FONT color=#000000 size=2>The difference is about +10 g on = each section.</FONT></DIV> <DIV><FONT color=#000000 size=2>What to do?</FONT></DIV> <DIV><FONT color=#000000 size=2>I think that the only way would be = to put leads on the keys. Is this correct?</FONT></DIV> <DIV><FONT size=2>To use the piano with + 10g of touch weight is good?</FONT></DIV> <DIV><FONT size=2></FONT><FONT color=#000000 size=2>If isn't = possible to obtain the manufacturer measurements what are the good touch = weight?</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT><FONT size=2>I thanks to = all</FONT></DIV> <DIV><FONT size=2></FONT><FONT color=#000000 size=2>ROGERIO CUNHA = - IC MEMBER OF THE GUILD</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV></BODY></HTML>