<html>
<body>
Or even better, put a new set of flanges on. They're not all that
expensive. <br>
At least that way, you don't have to worry about something coming back to
<br>
bite you later. :-) <br><br>
Avery <br><br>
At 05:14 PM 6/29/04, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>Try the
heat towards the tight centers from a hand held hair dry on hot.<br>
</font>James Grebe<br>
Piano-Forte Tuning & Repair<br>
Artisan of Wood<br>
<a href="http://www.JamesGrebe.com">WWW.JamesGrebe.com</a><br>
1526 Raspberry Lane<br>
Arnold, MO 63010<br>
<a href="mailto:pianoman@accessus.net">pianoman@accessus.net</a><br>
<dl>
<dd>----- Original Message ----- <br>
<dd>From:</b> <a href="mailto:gbart@thezone.net">Geo Bartlett</a> <br>
<dd>To:</b> <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>
<br>
<dd>Sent:</b> Tuesday, June 29, 2004 4:56 PM<br>
<dd>Subject:</b> Old Piano<br><br>
<dd><font face="arial" size=2>I have an old piano to rebuild that has had its action flanges sprayed with WD40. What can I do to overcome these tight centres in the butts and the jacks other than re-pin??<br>
<dd>George<br>
</font>
</dl></blockquote></body>
</html>