<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
You can press carpenters glue through. Just squezze on a line and use a
hankerchief on your forfinger. Repeat as many times as necessary til you
see glue coming through on the other side.
<p>RicB
<p>Farrell wrote:
<blockquote TYPE=CITE><style></style>
<font face="Arial">I might need to
glue a buzzing rib today on a Yamaha GH1. If the buzz source is a rib,
the rib is not loose enough to insert anything between the rib and the
panel. The only thing I can think of doing would be to wick some thin CA
in between the rib top and panel bottom. But how in the world can that
be done on a grand in a home with a nice floor without flipping it over?
Any ideas? Thanks.</font> <font face="Arial">This is my <i>IRATE </i>customer
from last week. I am going to take Ron N.'s advise and exhaust the possibility
of a penny or paper clip on the panel first (I've got my lights and mirrors
and search-sticks). And believe it or not, she can't be there again - YIKES!</font> <font face="Arial">Terry
Farrell</font></blockquote>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br>
</body>
</html>