<HTML>In a message dated 3/13/03 2:02:10 AM !!!First Boot!!!= , tomtuner@attbi.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT= : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">List,     &nbs= p;       I evaluated a Miller grand today 5= ’11” C.1901.Needs the whole deal at this point. This piano h= as one of the widest tails I’ve ever seen.Very boxy at the rear. orn= ate plate –Lots of iron! round legs—nice case with lousy old= ebony refinish. (Couldn’t detect if it was orig Mahogany or dare I = hope rosewood ) I’ve serviced quite a few Millers here in Mass. as t= hey were made locally, but I don’t recall seeing one with this shape= before. I found no scale #’s= or model letters anywhere. Anyone have any info on this model? I’m = trying to set value and /or make an offer.     &nbs= p;       Thanks     &nbs= p;       Tom Driscoll</BLOCKQUOTE><FONT= COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=3 FAMILY="S= ANSSERIF" FACE="Arial" LANG="0"> Tom  This will turn out to be a nice piano, but don't expect to make any money. I= t will take a lot of time to rebuild the piano, but because of the name, you= won't be able to get what for it what it is worth. (It will be worth around= $15,000 -- $20,000, but you'll only get around $8,000 -- $10,000, if that m= uch.) For an offer, see what they want for it, and offer half, but no more than $1= 000. It would be better if you could get someone (private party), to buy it,= and offer to rebuild it. You'll have money in your hand. Wim </HTML>