<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=Arial size=2>Patrick, do you mean a gem like the one = pictured below? Indeed, the sides are not glued to the frame at all - they are = hinged in back and screwed in front.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT><IMG alt="" hspace=0 src="cid:001101c5139c$7d0f2e60$fbb62341@youro0kwkw9jwc" = align=baseline border=0></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>But Greg indicated that the entire = keybed, action and sides had separated from the piano back (or at least that is = more-or-less what I understand him to be describing). I don't think Wurly ever made = any piano quite like that.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Hey, but isn't that beastie above a = real beaut'?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry Farrell</FONT></DIV> <DIV><BR><FONT face=Arial size=2>> Are you sure the dang thing = was glued together in the first place? I <BR>> have a vague recollection of = having serviced several naugy Wurlies in <BR>> which the case was secured to = the body of the piano with only a handful <BR>> of small screws. I had to = lift the whole unit off to tune  the beast. <BR>> Is this what you = have? Or maybe there *had been* a glue joint (long <BR>> ago) on the ones I = worked on, but it had vaporized some decades ago.<BR>> Good luck!<BR>> Patrick<BR>> On Feb 15, 2005, at 12:54 PM, Greg Graham wrote:<BR>> = <BR>> > The glue joints on both of the upper, horizontal = sides<BR>> > have separated from the back frame.</FONT></DIV></BODY></HTML>