<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Georgia size=2>I wanted to ask what you were using = to glue the magnets in. I'm having a problem with my homemade refrigerator magnets = staying together. Sounds like you're having the same problem.</FONT></DIV> <DIV><FONT face=Georgia size=2>Keith Roberts</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A title=Richard.Brekne@grieg.uib.no href="mailto:Richard.Brekne@grieg.uib.no">Richard Brekne</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = title=pianotech@ptg.org href="mailto:pianotech@ptg.org">PTG</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, July 03, 2003 = 1:36 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> V-cap update</DIV> <DIV><BR></DIV>This looks a bit better eh ??. Routed out a 20mm chanel = 5 mm deep into the key and use the key itself to do the job of the = flange.  I also repositioned the whippen magnets so that they are just behind the = jack... as far out on lower arm of the whippen as I can get them. They are = countersunk so that only 1 mm protrudes. Probably stay put better.  </BLOCKQUOTE></BODY></HTML>