<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 5.50.4134.600" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Fellow Techs< Seeking advice on =
checking
problems encountered when regulating older steinway actions> =
(Assuming
backchecks not worn)< Roughing tails has helped, angle changes =
of the
backcheck to steinway service manual diagrams helps also,but I still can =
get
some hammers bouncing off the backcheck.> <Balancier springs are =
not too
strong>Raising the height of the backcheck seems to be the most =
effective> Should I consider replacing backchecks with a taller =
profile
part? old wires replaced also or new backchecks on the origional
wires?> Thanks for your responses>< Tom
Driscoll></FONT></DIV></BODY></HTML>