<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2014.210" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Don:</FONT></DIV>
<DIV><FONT face=Arial size=2>Thanks for the information. =
However, I
have never heard of this glue. Where can it be =
purchased.
Thank you John Freeman</FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A href="mailto:donmannino@mediaone.net" =
title=donmannino@mediaone.net>Don
Mannino</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
href="mailto:pianotech@ptg.org"
title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, April 23, 1999 =
10:14
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> RE: Glue for Kawai =
plastic
</DIV>
<DIV><BR></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=830261203-24041999>John,</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=830261203-24041999></SPAN></FONT> </DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN =
class=830261203-24041999>The
best thing I can recommend is Hot Stuff gap filling glue. It will grab =
the ABS
fine, and will give you a little time to settle the dampers in =
position. Just
be sure you have the solvent handy so that you don't become an =
accessory item
permanently fastened to the action, and be sure the damper is well =
aligned
before you move on to the next note.</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=830261203-24041999></SPAN></FONT> </DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=830261203-24041999>PVC-E works well for gluing felt and wood =
to ABS, but
I have not tried it for ABS to ABS - let me know if you do try
it.</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=830261203-24041999></SPAN></FONT> </DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN =
class=830261203-24041999>Don
Mannino</SPAN></FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; =
MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">
<DIV class=OutlookMessageHeader><FONT face="Times New Roman"
size=2>-----Original Message-----<BR><B>From:</B> =
owner-pianotech@ptg.org
[mailto:owner-pianotech@ptg.org]<B>On Behalf Of</B> John
Freeman<BR><B>Sent:</B> Friday, April 23, 1999 3:24 PM<BR><B>To:</B> =
pianotech@ptg.org<BR><B>Subject:</B> Glue for Kawai plastic
<BR><BR></DIV></FONT>
<DIV><FONT face=Arial size=2>Hi: </FONT></DIV>
<DIV><FONT face=Arial size=2>I am back on this list. I =
would like an
opinion from a piano tech who has experience with glueing plastic =
dampers to
plastic damper wire blocks. What is the best glue for this
purpose. I have a whole set to replace on a piano which was =
vandalized
in a University practice room. The whole set of dampers and =
damper
levers were torn to pieces along with about half of the hammer =
butts, shanks
and hammers.. I have been off the list for a while as my =
modem
went bad and I also changed my IP account. Thanks in
advance, John
Freeman</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>