<html>
<font size=3>At 12:41 AM 04/29/2001 -0700, you wrote:<br>
<blockquote type=cite cite>Wallace,<br>
I have done a board with similar situation, using water thin Epoxy.
Used<br>
masking tape under the cracks. Wedged the board up and injected the
epoxy<br>
with blunt needle syringe. Worked adequately and the customer was happy,
as<br>
the buzzes went away and the sound improved enought to be
tolerable.<br>
regards,<br>
Joe Garrett</font></blockquote><br>
I method I've used is to tape the crack on the board surface, the tape
needs to be<br>
tight across the crack and not concave. Invert the piano and apply
epoxy from the 'bottom'.<br>
This gives a level surface and you don't have to worry too much about
shrinkage.<br>
<br>
Regards,<br>
Jon Page, piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jonpage@mediaone.net" eudora="autourl">mailto:jonpage@mediaone.net</a><br>
<font size=3><a href="http://www.stanwoodpiano.com/" eudora="autourl">http://www.stanwoodpiano.com<br>
</a></font>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</html>