<html>
<body>
I don't mean to be a smart a** here, but why not sand, file, whatever,
with <br>
the liquid chalk "stuff" to make it fit correctly? That's the
way I've <br>
always heard it should be done, anyway. <br><br>
Avery <br><br>
At 09:52 AM 6/29/04, you wrote:<br>
<blockquote type=cite class=cite cite><font face="MS Sans Serif, Geneva">It
means to use material such as epoxy or resin which is applied to the
flange side of the pinblock and then pulled tight up against the flate
flange to make a perfect fit against the plate. <br>
</font> <br>
David Love<br>
<a href="mailto:davidlovepianos@earthlink.net">davidlovepianos@earthlink.net</a><br>
<br>
<br>
<dl>
<dd>----- Original Message ----- <br>
<dd>From:</b><a href="mailto:VOCE88@aol.com"> </a><br>
<dd>To:
</b><a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a><br>
<dd>Sent:</b> 6/29/2004 5:56:00 AM <br>
<dd>Subject:</b> Re: Glassing pinblocks<br><br>
<dd><font size=2>I also don't know what is meant by "glassing a
pinblock". Can someone enlighten me please?<br>
<dd> <br>
<dd>Rich Galassini<br>
<dd>Cunningham Piano Co.<br>
<dd>(800) 394-1117 <br>
</font>
</dl></blockquote></body>
</html>