<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2722.900" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV> </DIV>
<DIV> </DIV>
<DIV>----- Original Message ----- </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px; BORDER-LEFT: #000000 2px =
solid">
<DIV>
<DIV>From: <<A
href="mailto:tune4u@earthlink.net">tune4u@earthlink.net</A>></DIV>
<DIV>To: "Pianotech" <<A
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>></DIV>
<DIV>Sent: Monday, March 31, 2003 9:34 PM</DIV>
<DIV>Subject: Pins & Cups</DIV></DIV>
<DIV><BR></DIV>
<DIV>> <BR>> what kinds of<BR>> solutions are there to the =
problem of
piano bench feet scraping around on<BR>> nice floors?</DIV>
<DIV> </DIV>
<DIV><STRONG>Alan - the aforementioned felt pads work great, and are =
readily
available at hardware stores. Another alternative is the nylon type=
, and
one style of these has the added benefit of making the bench height=
somewhat adjustable thru the use of a threaded rod screwed into a =
threaded
insert. This is a very effective fix when the bench doesn't =
sit
perfectly level on the floor, causing it to rack when you sit on it. =
;
They slide very nicely on wood floors and don't attract dust and animal =
hair
like the felt ones. They will raise the overall height =
a
minimum of 1/4 to 3/8 " though. These are also readily available at=
hardware stores. </STRONG></DIV>
<DIV><STRONG></STRONG> </DIV>
<DIV><STRONG>Mark Potter</STRONG></DIV>
<DIV><STRONG><A
href="mailto:bases-loaded@juno.com">bases-loaded@juno.com</A></STRONG><=
/DIV>
<DIV><STRONG></STRONG> </DIV></BLOCKQUOTE></BODY></HTML>