<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2627" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#d8d0c8> <DIV><FONT size=2>Is it OK to give a few taps to a loose tuning pin = without pulling the action and supporting the block?</FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>Clearly, support is necessary when driving a pin = into an empty hole.  But I've run into a few grands that have just two or three = loose pins and plenty of coil height.  It's so much quicker to give them = two or three taps with my Handy Hammer (side note: the combination handle grips = only *twisting* tools!), rather than bringing out the CA...</FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>--Cy Shuster--</FONT></DIV> <DIV><FONT size=2>Bluefield, WV</FONT></DIV> <DIV> </DIV></BODY></HTML>