<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=us-ascii">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>Thanks Roger. I've been won over. </DIV>
<DIV> </DIV>
<DIV>What methods do folks use to keep the water bath at 130 F? I have a =
Rival
Hot Pot (the one Bill Spurlock recommends). It has a little dial guage =
that I
have set to low. That was close to boiling, so I put the little =
thingeemabobble
thing in the plug that Schaff (or whoever) sells for regulating the heat =
to a
soldering iron for ironing key bushings and whatnot (a reostat?). I set =
that on
the lowest setting also, but the pot held at a steady 140 F. Any
recommendations? And I don't want to be feeding it ice cubes every five =
minutes
either! Thanks.</DIV>
<DIV> </DIV>
<DIV>Terry Farrell</DIV>
<DIV> <SPAN id=__#Ath#SignaturePos__></SPAN> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=baldyam@sk.sympatico.ca =
href="mailto:baldyam@sk.sympatico.ca">jolly
roger</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, December 11, =
2001 8:51
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Key Bushings & =
Hot Hide
Glue</DIV>
<DIV><BR></DIV><FONT size=3>Hi
=
Terry,<BR> &nb=
sp;
There will be no turning back, you are hooked. My goodness =
another
hot hide glue addict. Warning, you may start to find lots =
of uses
for it <G><BR><BR>Regards =
Roger</FONT><BR></BLOCKQUOTE></BODY></HTML>