<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1264" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I have used them all on ivory to good
effect.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry Farrell</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=A440WRMPiano@tm.net =
href="mailto:A440WRMPiano@tm.net">William R.
Monroe</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, January 08, =
2004 8:38
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Buffing =
Keytops</DIV>
<DIV><BR></DIV>
<DIV><FONT face="Bookman Old Style" size=4>Yeah,</FONT></DIV>
<DIV><FONT face="Bookman Old Style" size=4></FONT> </DIV>
<DIV><FONT face="Bookman Old Style" size=4>Using a buffing wheel =
set-up.
Sorry I forgot to mention. Thanks to all for responding.
Helpful. Do I presume that tripoli, red rouge, and or jewelers =
compound
(or white for that matter) are all acceptable on ivories as =
well?</FONT></DIV>
<DIV><FONT face="Bookman Old Style" size=4></FONT> </DIV>
<DIV><FONT face="Bookman Old Style" size=4>Thanks,</FONT></DIV>
<DIV><FONT face="Bookman Old Style" size=4>William R.
Monroe<BR>Assoc.<BR>Madison, WI</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=mkurta@adelphia.net =
href="mailto:mkurta@adelphia.net">MKurta</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, January 08, =
2004 7:17
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Buffing =
Keytops</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I assume you're talking powered =
buffing wheels
rather than by hand? I mounted three large buffing wheels =
side-by-side
on an electric motor that turns at 1750 rpm. Then I use the =
large
white stick type buffing compound that Pianotek sells on only the =
left-most
wheel. That leaves the other two clean for polishing. =
Good
results-if needed to removes scratches and imper-</FONT></DIV>
<DIV><FONT face=Arial size=2>fections, hold the keytop on the =
left side of
the setup for as long as needed, then polish on the right =
side. Talk
to Mark at Pianotek, nice folks to deal with and very helpful with
advice. </FONT></DIV>
<DIV><FONT face=Arial size=2> Mike Kurta,
RPT</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>