<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Get out a big fat flashlight and peer = in under the keys along the sides of the cheekblocks.  Chances are you will find = some long screws going through the block and into the sides if the = arms.  You may have to reach between some keypins to get at them.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Z! Reinhardt  RPT<BR>Ann = Arbor  MI<BR><A href="mailto:diskladame@provide.net">diskladame@provide.net</A></FONT><= /DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A title=rshiflet@eaznet.com href="mailto:rshiflet@eaznet.com">Ron = & Lorene Shiflet</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = title=pianotech@ptg.org href="mailto:pianotech@ptg.org">PTG - send/receive</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, June 30, 2001 = 1:03 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Lester Grand</DIV> <DIV><BR></DIV> <DIV><FONT face=Arial size=2>    I have a friend = who is moving and has a Lester Grand to move.  I went by his home the other = night to tie the action down and I'm embassed to admit it, I could not pull the = action.</FONT></DIV> <DIV><FONT face=Arial size=2>    Here's the specifics:</FONT></DIV> <UL> <LI><FONT face=Arial size=2>The keyslip was removed</FONT> <LI><FONT face=Arial size=2>The cheek blocks were loose</FONT> <LI><FONT face=Arial size=2>All screws from underneath were = gone</FONT> <LI>The cheekblocks were attached to the fallboard either from = behind or beneath.  I could not un attach them.  At the same time, = the key rail  was hinged to the fallboard.  <LI>When I would try to lift the fallboard, it would butt up against = the pin block.  <LI>The sharps would not depress far enough that the boardes would remove.  <LI>Since the cheeks blocks were loose I could not unattach the = fallboard from the cheekblocks underneath. <LI>The fallbopard would not drop forward enough for me to ascertain = if the falbaord was attached to the cheekblocks from underneath.</LI></UL> <DIV><FONT face=Arial size=2>    What am I missing?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Ron = Shiflet</FONT></DIV></BLOCKQUOTE></BODY></HTML>