<html>  <head></head> <body>  <DIV></DIV>Thanks Bob, good advice since this is a high polish black polyresin.<BR> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message from "Robert Edwardsen" <eedward2@rochester.rr.com>: -------------- <BR><BR> <META content="MSHTML 6.00.2800.1491" name=GENERATOR> <STYLE></STYLE> <DIV><FONT face=Arial size=2>Make sure you wipe that gorilla glue off any finished surface that can be seen too, it dries into a hard yellow foam that doesn't come off without damage to the finish.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Rob E.</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=imatunr@srvinet.com href="mailto:imatunr@srvinet.com">Joe And Penny Goss</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">Pianotech</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, April 17, 2005 9:38 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: squeaky lyre</DIV> <DIV><BR></DIV> <DIV><FONT face=Arial size=2>Hi Rick,</FONT></DIV> <DIV><FONT face=Arial size=2>If the parts are loose enough to disassemble easily, use "Gorilla" glue.</FONT></DIV> <DIV><FONT face=Arial size=2>It will fill the spaces. Wear gloves, or your hands will look like a gorilla's for a few days. <G></FONT></DIV> <DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A href="http://www.mothergoosetools.com/">www.mothergoosetools.com</A></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=richard.ucci@att.net href="mailto:richard.ucci@att.net">richard.ucci@att.net</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, April 17, 2005 7:18 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> squeaky lyre</DIV> <DIV><BR></DIV> <DIV>Hi list, I've got a 90's Otto Altenburg Grand with a creaky pedal lyre. I tightened all the supports and where it attaches to the piano, but it is loose at the top part ot the lyre itself. I was thinking of taking off the lyre and ca glueing whatever parts connect at that point. </DIV> <DIV> </DIV> <DIV>Any help would be greatly appreciated.</DIV> <DIV> </DIV> <DIV>Rick Ucci/Ucci Piano  </DIV></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE>  </body> </html>