<html>
<!-- BEGIN WEBMAIL STATIONERY -->
<head></head>
<body>
<!-- WEBMAIL STATIONERY noneset -->
<DIV>Hi Folks,</DIV>
<DIV>I'm about to embark on an 1920's era upright partial rebuild. Restring, New Hammers, Jack Springs, Butt Felts, Bridle Straps,Dampers. I'm looking for any advice on order of tasks, also, how many of you remove the keybed and string the piano on its back? </DIV>
<DIV>Do you use something to raise the piano up to a comfortable height for stringing? I have a workbench that will hold 1,000 lbs ,also have tilter. I've committed Reblitz to memory and also have most of the Spurlock pamphlets. Also, has anyone tried Arlidge strings?</DIV>
<DIV>Soundboard ,ribs,and bridges are good , keys don't need rebushing yet. </DIV>
<DIV>Thanks,</DIV>
<DIV>Rick Ucci/Ucci Piano</DIV>
<!-- END WEBMAIL STATIONERY -->
</body>
</html>