<html>
My theory is that the glue, for whatever reason, has soaked through the
bushing cloth and made the graphite sticky. I have had to ream or
rebush many of these bushings, and the ones that fell out were totally
hard. I have looked at them through the magnifying glass and the
graphite looks like dag. Roger has assured me that the
problem has been fixed.<br><br>
Chris Gregg<br><br>
At 10:15 PM 8/25/2003 -0600, you wrote:<br><br>
<blockquote type=cite class=cite cite>Hi Dave,<br>
Sorry about the slowness in replying. I ream them out to #21
with Mannino reamers, it cuts all the garbage out, and have had no
recalls to my knowledge.<br><br>
Regards Roger<br><br>
<br>
At 10:05 AM 8/15/2003 -0400, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>Hello
Roger, <br><br>
There is a question I forgot to ask: are the flange bushings likely
to still be good in this piano? <br><br>
Thanks again, <br><br>
Dave Stahl <br><br>
In a message dated 8/14/03 9:42:25 PM Pacific Daylight Time,
Piannaman@aol.com writes: <br><br>
<br>
<blockquote type=cite class=cite cite>In a message dated 8/14/03 8:36:13
AM Pacific Daylight Time, roger.j@sasktel.net writes: <br><br>
<br>
<blockquote type=cite class=cite cite>Hi Dave, <br>
Contact Robert at Samick he will give you the authorization to do
warranty work, He is aware of the problems. <br><br>
But first contact the dealer, he may be able to help. <br><br>
The principal problem is graphite that has been applied too thick. There
was a plating issue, but not that recent. <br><br>
The graphite has now been dropped from all Samick action parts.
Products that have all Renner parts will have a light coat of graphite on
the cloth. <br><br>
I would respectfully suggest, that you not refer to the instrument as a
PSO, if you are looking for max cooperation. </font></blockquote><br>
<font size=2><br>
Roger, <br><br>
Thanks for the input. Apologies for the PSO remark.... biting
the hand that feeds one is never a good idea! <br><br>
I have dealt with Robert before, and I have a call in to him about this
problem. He has been very helpful and has been quite prompt about
sending parts out quickly.
</font></blockquote></blockquote>
<x-sigsep><p></x-sigsep>
<a href="http://www.tuneit.ca/" eudora="autourl">http://www.tuneit.ca<br>
</a></html>