<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2> I draw a dial =
showing 0 at the
top of the scale, marks off to the right showing sharp, and the same on =
the left
showing flat. Then I'll draw the needle where the tuning is now =
(way flat)
and where it should be at 0. I'll explain that when the string is =
tuned to
0 it will immediately fall back in the direction of flatness. Out =
of
tune. Then I'll explain that tuning a small amount to the right =
will
compensate for the drop in pitch, it will then be back to zero instead =
of
below. Maybe this is too complicated for most =
folks.......</FONT></DIV>
<DIV><FONT face=Arial size=2> Using an EDT, I tune =
one string,
stop the spinner or lights, give it a few minutes to settle, and =
go back
and show the customer that now it is flat, proving the need for two
tunings.</FONT></DIV>
<DIV><FONT face=Arial size=2> Mike
</FONT></DIV></BODY></HTML>