<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1498" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>After several months of using TiteBond = III, I'm happy to report that it is now my glue of choice on those repairs that I = don't/expect to ever have to take apart! </FONT></DIV> <DIV><FONT face=Arial size=2>Some of the properties I like: 1. It = doesn't stain my fingers like TiteBond II. 2. It has a longer "working time" than = TiteBond II. 3. It doesn't clog up sanding devices as badly as either TiteBond or = TiteBond II. 4. It dries to a color that is less conspicuous. (Soundboard glue-up = comes to mind.) 5. It is really strong!</FONT></DIV> <DIV><FONT face=Arial size=2>The only down-side that I've found, is = that it is best to let it cure a full 24-36 hours before attempting to put major = stress on the joint, such as planing, etc.</FONT></DIV> <DIV><FONT face=Arial size=2>For those of you who haven't tried it, = I do recommend it.</FONT></DIV> <DIV><FONT face=Arial size=2>Best Regards,</FONT></DIV> <DIV><FONT face=Arial size=2>Joe Garrett, R.P.T.<BR>Captain, Tool Police<BR>Squares R I</FONT></DIV></BODY></HTML>