<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2713.1100" name=GENERATOR> <STYLE>  </STYLE> </HEAD> <BODY lang=EN-US vLink=blue link=blue bgColor=white> <DIV>If you have a good digital scale you can modify them pretty easily, or at least I could on the ones I have.  They were all heavy, so fixing them amounted to removing weight.  I didn't have to add anything for any of the weights.  The 32-gram weight now looks like Swiss cheese, but it is now 32-grams!</DIV> <DIV> </DIV> <DIV>dave *********** REPLY SEPARATOR *********** On 5/3/2002 at 8:49 AM Tom Driscoll wrote:</DIV> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid"> <DIV class=Section1>     -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org] On Behalf Of Stuart & Aimee Balsillie Sent: Thursday, May 02, 2002 5:13 AM To: pianotech@ptg.org Subject: Re: ACTION WEIGHTS SNIP <DIV> By the way, the weight were standard brass weight used in the trade................well I hope they are the same as the ones I bought at the part suppliers here.</DIV> <DIV>  </DIV> <DIV> Stuart</DIV> <DIV>               Stuart,             I had  the small set of brass weights common from the big houses. A pharmacist friend of mine checked them with a very accurate scale and they were not even close to the #’s stamped on the disks.             Good luck,              Tom Driscoll              </DIV> <BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"> <DIV>  </DIV></BLOCKQUOTE></DIV></BLOCKQUOTE></BODY></HTML> <PRE> _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________</PRE>