<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content="text/html; charset=iso-8859-1" = http-equiv=Content-Type> <META content="MSHTML 5.00.2919.6307" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV>I just wanted to experiment with the ebony, so what I did was use = some Enduro polyurethane black that I had left over from before. It is also = real thick - almost like tar straight out of the can. It will fill the grain, = but takes many coats. Who/where is Simtec and exactly what primer are you = using? Thanks.</DIV> <DIV> </DIV> <DIV>Terry Farrell<BR>Piano Tuning & Service<BR>Tampa, Florida<BR><A = href="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</A></DI= V> <BLOCKQUOTE style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: = 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A href="mailto:BUNKYPIANO@AOL.COM" title=BUNKYPIANO@AOL.COM>BUNKYPIANO@AOL.COM</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = href="mailto:pianotech@ptg.org" title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, January 22, 2001 = 6:03 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Refinishing = Success at Last!</DIV> <DIV><BR></DIV><FONT face=arial,helvetica><FONT size=2>just a = suggestion, when doing ebony use a polyesther primer such as can be <BR>obtained from simtec...you do not have to use a filler, although that it <BR>still recommended, it goes on so thick and can be sanded just as easily as <BR>lacquer....finish normally. <BR>tom mc nabb</FONT> </FONT></BLOCKQUOTE></BODY></HTML>