<html> <body> Hi Julia, Respectfully, PVC-E (Polyvinyl Chloride Emulsion)glue and PVA (Polyvinyl Acetate) glue are different types of glue.  They may smell the same and feel the same to the touch, but they have a different chemical makeup and have different uses.  I hope that the keytop you glued on using Elmer's glue stay on all right.  I would perhaps use Elmer's to glue together two pieces of wood.  But for gluing plastic keytops to wood keysticks, PVC-E glue is what I would trust. Sincerely, David Vanderhoofven Joplin, MO At 08:10 AM 12/19/2004, you wrote: <blockquote type=cite class=cite cite="">Greetings,            About a year ago, I ordered plastic keytop glue from Schaff, only to open up the jar and take a whiff. Smelled like Elmer's to me! So I checked a bit to my finger's touch. Felt like Elmer's to me! Hence, I used Elmer's on a few keytop jobs. Julia Reading, PA In a message dated 12/2/2004 4:40:42 PM Eastern Standard Time, 741662027@theshusters.org writes: <blockquote type=cite class=cite cite="">Isn't Elmer's regular white glue PVA?  I special-ordered PVC-E for keytops from Schaff; haven't seen it in stores.   --Cy Shuster-- Bluefield, WV</blockquote></blockquote></body> </html>