<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<p>Wimblees@aol.com wrote:
<blockquote TYPE=CITE><font face="Arial"><font size=-1>I want to replace
the blocks. But the question I have is measurements. About 20 years ago
when I put a new action in a Steinway, and these blocks were not attached
to the action frame. I think I remember I had to sort of go by where the
striking point was of the last couple of notes, combined with the hieght
of the hammers. I had a hell of time figuring out where to put them. Is
there some measurement I can go by to determine where I have to put the
blocks, and how high the action has to be?</font></font>
<p><font face="Arial"><font size=-1>Wim</font></font></blockquote>
<p><br>Not sure of what you mean by "blocks". Do you mean where the top
action screws into the key frame... as in under each bracket ?
<br>
<br>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br> </html>