<HTML>List Readers, I worked on a Brambach 5 foot (or so) grand a few weeks ago, and after t= uning it, I cleaned it inside and out.  The regulation wasn't as bad as= I expected, but some of the hammers were falling way too far after let-off.=  I was going to adjust the drop screws, when I realized that there wer= e none.  Instead, it turns out that the drop adjustment is a spoon moun= ted on the jack that regulates drop distance of the knuckle/shank.  I s= uppose with some practice, and with the appropriate tool, it wouldn't be tha= t hard to regulate. But then, one might get overly enthusiastic and snap a j= ack or two from time to time... I just thought it was odd and worth mentioning, since I'd never seen th= at configuration before.  I doubt that I'll ever be called on to do a f= ull regulation on one of these, but just in case, does anyone have tips (bes= ides match-tips) on regulating these relics? Thanks, Dave Stahl</HTML>