<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#B8B8B8">
Could be Joe. I started years ago carrying some sort of little flashlite
around with me to inspect as closely as I could the insides of any tunning
pinhole when I decide to pull a pin for replacement. If there is a crack
I want to know about it if I can so I can help the customer decide best
what to do about it.
<p>These days Maglite makes these great little mini Mags.... works perfectly
for inspecting tuningpin holes.
<p>Joseph Garrett wrote:
<blockquote TYPE=CITE><style></style>
<font face="Arial">IMHO when you
shimmed the loose pins, that spread the existing crack in the pin block,
causing neighbor pins to become loose. You probably exacerbated the situation,
unknowingly. I've been there. It's time to say the "last rites" on that
one.</font><font face="Arial">Regards,</font><font face="Arial">Joe Garrett,
R.P.T.</font></blockquote>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br>
</body>
</html>