<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content="text/html; charset=iso-8859-1" = http-equiv=Content-Type> <META content="MSHTML 5.00.2314.1000" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV>Hi List,</DIV> <DIV>For the full size upright, I can only find one size of = flange.</DIV> <DIV>The centre pin holes are too far from the rail, and the damper = stands out.</DIV> <DIV>What can be done to put the dampers on the same plane.</DIV> <DIV>I can bend the head to fit, but then when the pedal is used, it = comes off uneven.</DIV> <DIV>I could use a thicker cloth on the damper lever.</DIV> <DIV>I guess what I really want to know, is, is there a source for other = size flanges, or are we stuck with one size?</DIV> <DIV>I didn't have the chance to repair the old flange, these are a few = that have been replaced previously.</DIV> <DIV>Has anyone tried redrilling and rebushing a new position for the = pin?</DIV> <DIV>Regards,</DIV> <DIV>John M. Ross</DIV> <DIV>Windsor, Nova Scotia, Canada.</DIV></BODY></HTML>