<HTML> <HEAD> <TITLE>Re: Your(butt flange) choice, please</TITLE> </HEAD> <BODY> On 5/26/01 6:18 AM, "Wimblees@AOL.COM" <W= imblees@AOL.COM> wrote: <BLOCKQUOTE>In a message dated 5/2= 6/01 4:31:43 AM Central Daylight Time, jajones2@FACSTAFF.WISC.EDU writes: <BLOCKQUOTE> </BLOCKQUOTE> How old are these Yamahas, Joel? The problem I have run across is on Y's th= at are more than 10 years old. And the main problem seems to be that the screw= hole wears out, and it can't be tighten any more. So now what do you do? <B= R> Willem </BLOCKQUOTE>Willem, Size the hole with ca glue Joe Goss imatunr@srvinet.com www.mothergoosetools.com <http://www= .mothergoosetools.com> ----- Original Message ----- Willem, CA did  it again!  Size the hole.   I have also sized t= he butt  to make the pin fit in the slot when the edges become enlarged= .  Glue - screw on butt plate - let dry - check for free swinging cente= r.    When the butt plate is tight I find few ‘walking&= #8217; center pins.       98% of our inventory is 32 years old.  Bought = when the building was new and we paid $600 for UI’s.  Come around= in 10 years for the big time rebuild budget. Joel -- Joel & Connie Jones 9 Springwood Circle Madison, WI  53717 608 - 833 - 1488 FAX 608 - 833 - 6724 </BODY> </HTML>