<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.2722" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: =
Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=rol=
e_document
face=Arial color=#000000 size=2>
<DIV>There seems to be a lot of heavy weather being made of this backi=
ng
damper felt.</DIV>
<DIV>Surely, the simplest way is to cut strips of the backing
felt initially too wide. Apply a coat of the fabric adhesive to t=
he
strip of damper felt and lay it on the strip of backing. Stretch the da=
mper
felt strip gently so that is remains as straight as possible. Wh=
en
the adhesive has dried, offer up a thin steel straight-edge <EM>right
up against </EM>the strip of damper felt and run a scalpel down between=
the
sraight -edge and the damper felt. Because the scalpel blade is so thi=
n,
the backing felt will be perfectly flush with the damper felt. You wil=
l
have a perfectly trimmed strip of backed damper felt. You will then ju=
st
offer the backed strips to your guillotine and chop as many pieces as you
need. This technique obviously applies to strips of clip and wedge as =
well
as your tapered strips of flat felt. OK, it may be a little bit
wasteful of backing felt and scalpel blades cost more than sharpening a knif=
e,
but who cares if you are aiming for a perfect job.</DIV>
<DIV> </DIV>
<DIV>Ric</DIV></FONT></BODY></HTML>