<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=windows-1252"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Hello list et al</FONT></DIV> <DIV><FONT face=Arial size=2>I, like Herr D L Bullock, have made up = my own "set-off bridge" I used a couple of old cast upright action frames = (because they are HEAVY) and attached, on the cantilevered principle, a heavy 2" = x 1" main frame on the top of which protrudes two blocks of wood. Attached to = these blocks by means of screws is a long bar of wood which has a = vertical slot in each end through which screws go into the two blocks. This makes = vertical adjustment of the "set-off rail" possible. I use an engineers = depth rule to measure the distance from the underside of each string = section and then replicate this dimension in my "set-off rail". Because of = the overall weight of this tool it stays rigidly where I put it (behind the = grand action on the bench or clients' table) thereby making regulation of the = grand action out of the piano an absolute d.o.d.d.l.e.</FONT></DIV> <DIV><FONT face=Arial size=2>I hope my description of the beast is = enough - but if a piccy is required this too can be arranged...</FONT></DIV> <DIV><FONT face=Arial size=2>Regards from the Sussex Downs where, = after a sunny day, night is fast falling...</FONT></DIV> <DIV><FONT face=Arial size=2>Michael G = (UK)</FONT> </DIV></BODY></HTML>