<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content="text/html; charset=iso-8859-1" = http-equiv=Content-Type> <META content="MSHTML 5.00.2614.3500" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV> </DIV> <DIV>----- Original Message ----- <DIV>From: jolly roger <<A href="mailto:baldyam@sk.sympatico.ca">baldyam@sk.sympatico.ca</A>></= DIV> <DIV> </DIV> <DIV>Subject: Heinzman Treble Agraffes</DIV></DIV> <DIV><BR></DIV> <DIV>> Some thing to share, with my Canadian = collegues.<BR> <BR>> For some time now I have been hand reaming the plate agraffe holes with = a<BR>> 3/32" drill bit in a pin vice. Before restringing.<BR>> Hope this is = of use to some one.<BR>> Regards Roger<BR></DIV> <DIV>Thanks Roger. Hal Lyne demonstrated this procedure back in '77, and = I</DIV> <DIV>believe at the '65 national convention here in Calgary. Has worked very</DIV> <DIV>well over the years and been very useful. Did you meet him?</DIV> <DIV> </DIV> <DIV>Bob Moffatt</DIV> <DIV>Calgary, Alberta</DIV> <DIV>Canada</DIV></BODY></HTML>