<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1476" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>I recommend a "dent puller" type = system, for removing. After they're out, glue size with 50-50 cold hide glue & = water. Let dry. (overnight, if possible.) I made two punches for inserting the = pins, out of steel rod. Drill to the approximate depth, then grind to fine = tune the height of the pins. Of course, you'll need a drill press w/"x-y" vise = for accuracy. After grinding, be sure to "soften" the edges, so you don't = leave "tracks" on the rails. DAMHIKT! Then, you need one of my handy dandy = front key pin straighteners!<G></FONT></DIV> <DIV><FONT face=Arial size=2>Best Regards,</FONT></DIV> <DIV><FONT face=Arial size=2>Joe Garrett, R.P.T.<BR>Captain, Tool Police<BR>Squares R I</FONT></DIV></BODY></HTML>