<HTML>In a message dated 4/23/2003 4:16:11 PM Eastern Daylig= ht Time, gholley@hi-techhousing.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT= : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">couldn't see or hear last night= .   Could I please hear the YEA'S AND THE NAY'S on an initial step to <BR= > take.  Please refer to Gordon Stelter as "Thump" as we have been mistakingly switched around in past discussions.      My Regards,   Gordon Holley </BLOCKQUOTE> Hi Gordon: Do the step with covering the area under the pins after removing the action.=   Use thin CA; use a fan blowing across your work and I don't think you= would need a carbon mask.  I never have and I've done quite of few of = these "pinblock resurrections". Try to have doors and windows open in the ar= ea you are working and warn the customer about the odor.  You may have = to schedule this at a time when there are not many people around. It works well! Bob Bergantino, RPT Willoughby Hills, Ohio </HTML>