<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body> Joseph Garrett wrote: <blockquote cite="mid001501c3e5ef$3801eaa0$ae081ad8@z0w5j1" type="cite"> <pre wrap="">Ric, I checked out the rib layout pic. Neat. Still think you need a cut-off bar, as I proposed, else those two long ribs might be prone to collapse, as that's the area of greatest down-bearing. Still possibel, if'n ya haven't put the board back in yet. Best Regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I </pre> </blockquote> Hi Joe I havent yet glued it down... I want to re-do the damper system first... gives me lots of room to work in. I wasnt really sure about what you meant with your cuttoff bar suggestion... dimensions and exact placement were a bit foggy for me and now I dont think I have that picture you sent me. You wouldnt want to send again would you ? Heres another shot of the ribs so perhaps you can draw it in. <img src="cid:part1.03050303.03020508@grieg.uib.no" alt=""> </body> </html>