<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2722" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Okay, here is my first (and likely = lame) contribution to the daily mystery question.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>About 1980 Kawai KG-2S - about 5' 10" - = very good to excellent condition. Lady bought it used one year ago (she paid = $3,500 for it - perfect satin cherry case - she got a great deal!). During that = first year she had a QRS Pianomation player system installed on the = piano. We had set up a service appointment for cleaning the interior, tuning and = looking at a "loose" pedal.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>The left (una-corda) pedal was just = hanging down. I crawled under piano to check levers, etc. Everything with the = una-corda under the keybed appeared to be functioning just fine. Adjustment = appears good (in that, when the pedal travels down, the lever moves sideways in = the keybed). However, when you depress the left pedal the action frame = did not slide over to the right. The keyframe was resting on the left = felted keyframe stop. The action slid in and out easily. It was as if the = una-corda lever system was not hooked up to the action frame.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>What was the cause of the = non-functioning una-corda pedal?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>(This is probably too easy - however, = it did take me a good 10 or 15 minutes to fully figure it out.)</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry = Farrell</FONT></DIV></BODY></HTML>