<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=text/html;charset=iso-8859-1 = http-equiv=Content-Type> <META content='"MSHTML 4.72.3110.7"' name=GENERATOR> </HEAD> <BODY bgColor=#ffffff> <DIV> To the list I am just deeply studying the touchweight and I am trying to apply = everything that I read about this. I think that this is very important ! In some German actions there are the possibility of you change the = position of the action rail back ( to the back check ) or forward ( to the = capstan screw ) changing the point where the capstan screw touch the wippen = cushion. In some cases as on the Steinway there is no way to move the action = rail. In this case what happens with the action engineering if I put a wedge = between the wippen flange and the action rail? Is this correct? I thanks to all ROGERIO CUNHA - IC MEMBER OF THE GUILD </DIV></BODY></HTML>