<html xmlns:o="urn:schemas-microsoft-com:office:office" = xmlns:w="urn:schemas-microsoft-com:office:word" = xmlns:st1="urn:schemas-microsoft-com:office:smarttags" = xmlns="http://www.w3.org/TR/REC-html40"> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; = charset=us-ascii"> <meta name=Generator content="Microsoft Word 11 (filtered medium)"> <o:SmartTagType = namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="place"/> <o:SmartTagType = namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="State"/> <o:SmartTagType = namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="City"/>  <style>  </style> </head> <body lang=EN-US link=blue vlink=purple> <div class=Section1> Hello everyone –<o:p></o:p> <o:p> </o:p> My name is John Gilmore and I’m a piano tech in <st1:place = w:st="on"><st1:City w:st="on">Portland</st1:City>, <st1:State = w:st="on">OR</st1:State></st1:place>.  I’ve got a puzzle on my hands that I hope someone can help me = with.<o:p></o:p> <o:p> </o:p> Recently, I was called to service a short 1930’s Wurlitzer grand.  I = needed to pull the action, so I removed the key slip, which was attached with four screws.  Then I tried to remove the blocks and fall board – = but could not find how they were attached to the piano.  No screws from underneath the blocks or on the diagonal at the bass and treble = ends.  The fallboard hinges are only party visible, so I could see no screws there = to take out so as to remove the fall first.  I removed the small rubber = buttons from the tops of the blocks in hopes of finding screws under them = – nothing.  First time in 15 years that this kind of thing has = happened!<o:p></o:p> <o:p> </o:p> Does anyone out there have an idea?  Any input would be much = appreciated.<o:p></o:p> <o:p> </o:p> Thanks!<o:p></o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> </div> </body> </html>