<html>
<head>
</head>
<body>
I worked on one of these a long time ago. It was in about the same shape
as you described and I opted not to try and get inside due to lack of customer
budget. These weren't much of a piano, I think just the old typical spinet
like a million others Wurlitzer made. The case however was exceptionally
unique and I'm sure very few of these were made. If your customer ever decides
to unload it cheep/free and you have the room it might make a nice collector
piece if you can afford to store it for another 25 years. I would be willing
to bet there is less than 100 of them still in existence.<br>
<br>
Rob Goodale, RPT<br>
Las Vegas, NV<br>
<br>
Z! Reinhardt wrote:<br>
<blockquote type="cite" cite="mid:000a01c19e9e$8fb7e6e0$475a56d8@oemcomputer">
<meta content="MSHTML 5.50.4134.100" name="GENERATOR">
<style></style>
<div><font face="Arial" size="2">Hi Everyone!</font></div>
<div> </div>
<div><font face="Arial" size="2">Just for the amusement value ....</font></div>
<div> </div>
<div><font face="Arial" size="2">Have any of you tried servicing a "Juke-Box"
style Wurlitzer spinet? Shall we say politely, that getting the thing opened
up for servicing was counter-intuitive at best. When all was said and done
short of smashing case parts, the sides which curved around and formed about
2/3 of the front swung outward giving it the "spread-cheeks" look. Comically
strange.</font></div>
<div> </div>
<div><font face="Arial" size="2">Too bad the piano itself was nothing to
write home about -- bad pinblock, blown-out bridges, etc. ... clinically
dead but it was an heirloom so I did what I could to improve it without
blowing out the budget. (Sorry -- I didn't have a camera with me. Maybe
next time.)</font></div>
<div> </div>
<div><font face="Arial" size="2">Z! Reinhardt RPT<br>
Ann Arbor MI<br>
<a href="mailto:diskladame@provide.net">diskladame@provide.net</a>
</font></div>
</blockquote>
<br>
</body>
</html>